Builder's Best 110244 Foil Duct, 50 ft L, Aluminum/Polyester
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
Builder's Best 110224 Foil Duct, 8 ft L, Aluminum/Polyester
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
LAMBRO 3003L Elbow Kit, Plastic, White
Kit for clothes dryer installations. Includes white plastic 90 deg elbow with rubber gasket inside one side and 4 in metal worm gear clamp.
Builder's Best P-TANIUM 110889 Dryer Vent Hood, 4 in Duct
Durable through the wall hood. Fully assembled, riveted tailpipe, backdraft flapper. Standard mouth hood for good airflow.
Lambro 4 Inch Aluminum dyer Vent Head With Standard Tail Piece
Opening/closing damper prevents outside elements from entering the vent. (1) 4 aluminum preferred hood vent with 11 tail pipe. (1) 4 white plastic trim plate.
LAMBRO 406W Louvered Vent Kit, 10-Piece
Includes (1) louvered vent with tail pipe, (1) laminated duct, (1)trim plate and 2 adjustable nylon clamps.
HOSE WASHER MACHINE 4FT
Rubber washing machine hose. For both hot or cold water. I.O. couplings on straight end for positive seal. Specially compounded to resist hot water softening action. Burst pressure, 800 pounds. Highest quality. Identical to original equipment hose. Female and female coupling.
Builder's Best SAF-T-DUCT 010151 Close Elbow, 4.2 in Male x Female Thread,
Elbow turns 90 deg within 4 in. One male rotating snap-lock fitting, one female rotating snap-lock fitting. For 90 deg turns, especially on the dryer.
LAMBRO 3120L Flexible Semi-Rigid Duct Kit, 4 in, Aluminum
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
Builder's Best SAF-T-DUCT 010155 Offset Elbow, 4.2 in Male x Female Thread,
Use when outlet pipe on dryer protrudes up to 2-1/2 in. Can also be used where wall outlet pipe protrudes and is too large for the wall offset elbow. 4 in Dia fittings, aluminum. Turns 90 deg within 4-1/2 in. Includes one male snap-lock fitting and one female rotating snap-lock fitting.
PERISCOPE DRYER VENT KIT 2CLOSE
Made of 2" x 6" rigid aluminum
One 4" male, crimped rotating snap-lock(TM) collar fits into wall outlet
One 4" female, draw band rotating collar fits over dryer outlet
Two sections telescope from 0" to 18"
Baffles are included to help direct airflow in 3-5" situations
Meets clothes dryer manufacturer specifications